Philips VR220CAT owner manual Helpful Hints

Page 38

38 Helpful Hints

If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself.

If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with operations, please stay near the product. Our representatives will be happy to assist you.

No power

•Make sure the power plug is completely connected to an AC (alternating current) outlet.

•Make sure the power is turned on.

Power Failure

•Timer recordings, the clock setting, the language selection, and channel setup may be lost if the power fails for more than one minute. Follow the steps on pages 11 and 15 to reset the language, channels, and clock. Then, see pages 28-30 to reprogram your timer recordings.

A TV program cannot be recorded.

•Check the connections between the VCR, TV, antenna/cable, and Cable Box/Direct Broadcast System (if applicable). Details are on pages six-10.

•Make sure the tape has a record tab. Details are on page five.

•Check the TV/VCR position. Details are on page 22.

•Check the CH3/CH4 switch. Details are on pages 6-9.

The VCR will not perform a timer recording.

•Make sure the recording start and stop times are set correctly. Details are on pages 28-31.

•Make sure a tape is in the VCR and the tape has a record tab (page five). If, after programming a timer recording, you turn off the VCR power without putting a tape in the VCR, the TIMER light will blink.

•If the record tab on a tape is missing, the VCR will eject the tape. The TIMER light will blink.

•Make sure the VCR power is off.

•Make sure the clock is set. Details are on page 15.

•The VCR may not perform or continue a timer recording if a power interruption of more than one minute occurs.

•If you have a Cable Box/Direct Broadcast System, timer recordings are programmed differently. Details are on page eight.

•Finish programming a timer recording at least five minutes before the recording is set to begin.

•12 p.m. is noon; 12 a.m. is midnight.

There is no playback picture or the playback picture is noisy or contains streaks.

•Make sure the TV is on the same channel as the VCR’s CH3/CH4 switch.

•Make sure the VCR is in VCR position. (The VCR/TV light will appear on the display panel.)

•Make sure channel 03 or 04 is properly adjusted at the TV.

•Adjust the tracking. Details are on page 36.

•TVs placed too close to the VCR can cause interference during tape playback. Move the VCR away from the TV.

The VCR cannot be controlled with the remote control.

•Press the VCR button, then try the other VCR feature buttons.

•Make sure the VCR/TV light appears on the display panel. If it does not, press the VCR/TV button once.

•Aim the remote control directly at the VCR’s remote sensor. Details are on page 22.

•Remove all obstacles between the remote control and the VCR.

•Inspect and/or replace the batteries in the remote control. Details are on page five.

The Number buttons won’t work for channels above 69.

•Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter chan- nel numbers as a three-digit number. If you are using an antenna (not a cable signal), you may only select channels 2-69. Details are on page 18.

Page 37 Page 39
Image 38
Page 37 Page 39
Contents VR220CAT This bolt of lightning indi- cates uninsulated material Dear Philips product ownerFor Customer Use Model No Serial NoIntroduction FeaturesSafety Precautions Declaration of ConformityTable of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVCH3 CH4 Plug in the TV and the VCRRecording/Viewing Any Channel Cable Signal RF coaxialConnections Cable Box/DBS2Cable Box/DBS Cable SignalRecording One Channel/Watching Another RF coaxial Cable 3TV’s Antenna JackHookups With a Stereo TV Press the Menu button. The display shown below will appear Turning on Your VCR2Turn on the TV Automatic Channel Setup Press the VCR button, then press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitYou make each entry within 60 seconds of the previous entry Setting the ClockFollow the steps below to set your VCR’s clock. Make sure Daylight-Savings Time Press the VCR button, then press the Menu buttonLanguage Selection Remote Control Buttons Remote Control Buttons cont’d If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Read and follow the steps below to play a tape PlayingVHS Quasi Play Back Sqpb 1Turn on the TV 2Insert a tape in the VCR RecordingInsert a tape with its record tab intact in the VCR Recording One Channel/Watching Another VCR/TV light will disappear from the VCR’s display panelOne-Touch Recording Timer Recording Set the clock. Details are onTimer Recording cont’d Tape Speeds Timer Recording cont’dPress the STATUS/EXIT button. Program WAS COM Checking or Cancelling Timer Recordings Rerecording Tape Duplication Repeat Play Press the F.FWD/B button so that on appears besideReal-Time Counter Memory Press the STATUS/EXIT button to see the status displayViewing a Still Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Automatic Operation Features Blue Background Helpful Hints Helpful Hints cont’d Limited Warranty Video Cassette Recorder or PlayerPayment Amount $29.95 + Sales Tax = Total Limited Warranty cont’dTo obtain a replacement product from Philips Account numberGlossary Glossary/SpecificationsSpecifications Timer PowerRemote control AutomaticSupplied Accessories

VR220CAT specifications

The Philips VR220CAT is an innovative and versatile vacuum cleaner that redefines cleanliness with remarkable features and advanced technologies. Designed for modern households, this model encapsulates what consumers look for in a reliable cleaning solution: efficiency, power, and ease of use.

One of the standout features of the VR220CAT is its powerful suction capability. Equipped with a high-performance motor, it effortlessly lifts dirt, dust, and debris from various surfaces, including carpets and hard floors. The innovative Cyclone technology ensures that the suction power remains consistently strong throughout the cleaning process, providing thorough results without loss of performance.

The vacuum also boasts a unique multi-tier filtration system. This system traps both large particles and microscopic allergens, making the environment safer for those with allergies or respiratory issues. The HEPA filter effectively captures up to 99.97% of particles as small as 0.3 microns, ensuring that only clean air is released back into your living space.

The design of the Philips VR220CAT prioritizes user comfort and convenience. It features an ergonomic handle and lightweight structure, allowing for easy maneuverability around the home. Whether navigating tight corners or reaching high places, the vacuum's flexibility simplifies the cleaning task, reducing strain on the user.

Another notable characteristic of the VR220CAT is its versatility. The vacuum comes with a range of accessories designed for various cleaning scenarios. From floor brushes for carpets to crevice tools for tight spaces, this model can adapt to different surfaces and challenges, making it an all-in-one solution for home cleaning needs.

Furthermore, the vacuum incorporates a smart sensor technology that guides the cleaning process. By automatically adjusting the suction power according to the type of surface, it ensures optimal performance while conserving energy. This intelligent feature not only enhances cleaning efficiency but also extends the lifespan of the appliance.

In summary, the Philips VR220CAT is a cutting-edge vacuum cleaner that combines powerful suction, advanced filtration, user-friendly design, and smart technology. Its impressive performance and versatile capabilities make it an ideal choice for anyone looking to maintain a pristine home environment. With this model, Philips continues to demonstrate its commitment to quality and innovation in household cleaning solutions.
Top Page Image Contents