TAPE LIST |
|
|
| |
CASS. TITLE |
| LENGTH | ||
1 | RECORDING | 1 | 061 | MIN |
| RECORDING | 2 | 065 | MIN |
2 | RECORDING | 1 |
| MIN |
________________________________
EXITpMENU |
|
EDITp p | FINDpOK |
| ENGLISH | |
Editing recording titles | ||
| ||
|
|
In the Tape List, all recordings longer than 10 minutes are displayed with cassette number, recording title and length of recording. The TV channel, time and date are saved as a title. The title of this recording can only be changed after the recording has been completed.
To do this, the corresponding cassette does not have to be in the video recorder. In the following, you will read how to customise the titles to your wishes.
1Press TAPE LIST on the remote control. An overview of all saved titles/cassettes from the Tape List appears on the screen.
aI can see the message 'TAPE LIST- MEMORY EMPTY'
b There are no recordings saved in the Tape List. Therefore, it is not possible to add or change a title.
2Using ;qP or P r= select the title to be edited and confirm with
P .
3 | Using P or Q select the position where the letter/number/symbol |
| is to be changed or |
4Change the desired symbol using ;qP or P r= .
Deleting symbols
To delete all symbols of a recording title, press CLEAR (CL) at a symbol position.
5Repeat step 3and step 4until you have made the desired changes.
6Save the new title with OK .
7If you want to change more titles, repeat step 3through step 7.
8 To end, press TAPE LIST .
Tape List | 25 |
|