6Switch off with STANDBY/ON m .
The programmed recording will only function when the video recorder is switched off with STANDBY/ON m .
If any of the TIMER blocks are in use, ' k ' will light up on the video recorder display.
ENGLISH
|
|
| Problems and solutions for programmed | |
|
|
| recordings | |
|
|
|
|
|
|
|
|
| |
| PROBLEM | SOLUTION | ||
|
|
| ||
| The video recorder | bWhile a programmed recording is being made, you cannot operate your video recorder manually. |
| |
| does not react | If you want to cancel the programmed recording, press STANDBY/ON m . |
| |
|
| bThe video recorder was switched on several minutes before the start of a programmed recording. | ||
| ' k ' will flash in the | Switch off the video recorder with STANDBY/ON m . A programmed recording (timer) will | ||
| video recorder display | only function if the video recorder is switched off. | ||
| bNo cassette was inserted. Insert a cassette and switch off the video recorder using | |||
|
| |||
|
| STANDBY/ON m . | ||
|
|
|
|
|
| Cassette is ejected | bThe end of the tape was reached during recording. |
| |
| during recording |
| ||
|
|
|
| |
| The 'PROT' error |
|
|
|
| message appears | bA cassette was inserted with the security tab removed. Undo the erase protection (chapter | ||
| briefly in the display | 'Manual Recording', section 'Preventing accidental erasing of cassettes') or insert a different | ||
| then the cassette is | cassette. | ||
| ejected |
|
|
|
|
|
| ||
| Error message: 'FULL' | bIf this error message appears after pressing TIMER k , then all TIMER blocks are already |
| |
| programmed. No more recordings can be programmed. If you want to clear or check a |
| ||
|
| programmed recording (TIMER block), select it with ;qP or P r= . |
| |
|
|
|
|
|
|
|
|
|
|
Programming a recording (TIMER) | 47 |
|