RCA Audio Y-Adapter

2.Follow instructions A or B depending on which video connection you want to use:

A - If your cable or satellite box has an available Video RCA output, attach it to the AV-input adapter’s Video RCA input.

B - If your cable or satellite box has an available S-Video output, attach it to the AV-input adapter’s S-Video input. Using this conﬁguration will result in the best image quality.

3.Connect the audio output of your cable or satellite box to the 3.5mm stereo input located on the AV-input adapter.

Note: If your cable or satellite box does not have a 3.5mm stereo output, then an RCA Y-Adapter to single 3.5mm audio cable will be needed (not included).

4.At this stage, inDtube is properly connected to receive satellite or cable feed.

Note: If no more video and audio outputs are available on your cable or satellite box, then connect to inDtube by using the coaxial jack. The output should be labeled “Out to TV,” “TV Output” or something similar. A coaxial cable will be needed (not included) as well as the F-Connector to MCX Adapter (included) to connect to inDtube’s MCX input. The AV-input adapter is not needed for this conﬁguration. The cable or satellite box needs to provide such an output for this conﬁguration to work.

Note: The included software supports Macrovision. This means you can not record media through the AV-input adapter if Macrovision is being used on the source. For example: Trying to copy a DVD. For more information please visit http://www.Macrovision.com