Jack Lananne's Power Juicer PPJJEE VV22 Troubleshooting, Problem Possible Reasons and Solution

TROUBLESHOOTING
Problem		Possible Reasons and Solution
The motor does not	•	Check to see if unit is plugged in.
run after being	•	Locking bar is not locked in place properly.
switched on.	•	Check if all parts are assembled properly.
	•	Check if there is any residue left between blade and receptacle.
	•	Make sure pulp collector is properly assembled as the safety
		MicroSwitch will cause the unit not to operate if pulp collector
		is not in place.
	•	Check filter/blade is secured firmly in place.
The motor is running	•	Check that all parts are assembled properly and in the
with loud noise and		correct position.
shaking.	•	Juicing overripe fruit may result in too much pulp and will
		clog the filter. Turn machine off and clean the filter.
The motor overheats	•	The motor needs to warm up for 10 seconds before use.
causing the power to	•	The fruits and vegetables may be soft or overripe.
automatically shut off.	•	There may be too much pulp in the filter. Turn machine off
		and clean the filter.
	•	Motor stops running due to the built-in feature, the overheat
		safety control.
Juice splashes from the	•	This is normal.
rim of the receptacle.
Machine is running, but	•	Check spout to make sure it is the down position. The juice
no juice is coming out.		will not come out if spout is in the upright position.

10