Jack Lananne's Power Juicer PPJJEE VV22 manual Assemblycont

ASSEMBLY(CONT.)

4

Top

Rim

Filter/Blade

Receptacle

STEP 4:

Place filter/blade inside receptacle. Rotate the filter/blade allowing it to settle into alignment. Press down on rim of filter/blade firmly to secure.

IMPORTANT: The unit will not start until filter/blade is secure and firmly in place. The motor will not

start until the unit is properly assembled.

6 UPRIGHT POSITION

Juice Spout

DOWNWARD POSITION

STEP 6:

Make sure juice spout is in the downward position. If the juice spout is left in the upright position the juice will not flow. It will stay in the receptacle and may overflow from the sides.

Lid with built-in	5
Pulp guard
Pulp	Receptacle
Collector
		Juice
		Spout

STEP 5:

Place lid with built-in pulp guard on top of receptacle, making certain it is securely aligned with the pulp guard facing in the opposite direction of juice spout. Lock lid into place by lifting locking bar up until it clicks into grooves located on both sides of the lid. Make sure locking bar is in the full upright, locked position.

IMPORTANT: The unit will not start until this bar is properly locked in place and the pulp collector is properly assembled.

7 Pusher

Chute

Lid with built-in

Pulp Guard

STEP 7:

Insert pusher into chute. Always use pusher to feed fruits and vegetables into unit. Push gently, never force. The blade will do the

work.7