Pentair Automatic Pool Cleaner Preparation of your pool, Cleaner assembly

Skimmer

Basket

Pump

Strainer

2

Preparation of your pool

Before you assemble and install your Great White automatic pool cleaner, you should make sure that your pool is clean and free of algae. If necessary, make the following preparations before proceeding.

• Chemically balance the pool water

• Brush the pool and let the debris settle

• Hand vacuum the pool thoroughly

• Clean the filter and pump strainer basket (Figure 1)

Cleaner assembly
1. Check parts	Figure 1

Remove Great White and all of its parts from the box and check to make sure that all components were included (Figure 2).

ƒCleaner

ƒSwivelAssembly

ƒHandleAdapter

ƒReducer Cone

ƒHose: Twelve 4’lengths

ƒVacuum Regulator

ƒRegulator Cap

ƒVacuum Port Fitting

ƒFlow Gauge

	Cleaner
Handle Adapter
		Swivel	Reducer
		Ass'y	Cone
		W
		O
		L
		F
	W	M
	O
	L	U
	F	M
	M	I
	U	X
	M	AM
	I
Hose	N
	IM
	Flow
Twelve
4’ lengths	Gauge
	Vacuum	Vacuum	Regulator
	Port Fitting	Regulator	Cap
	Figure 2

2.Attaching swivel assembly to cleaner head

Installing the swivel assembly is a snap. Just insert it into the cleaner body and give it a quarter turn (Figure 3). If you attach a unidapt handle to the swivel for manual vacuuming, be sure it is the special, floating unidapt handle provided with the cleaner (Replacement Part No. GW9019). Use of a different unidapt handle will hinder the cleaner’s performance.

Swivel

Assembly

Figure 3

Great White Installation and User’s Guide