Black Box 3D HDMI Fiber Extender, VX-HDMI-FO manual Operation

Page 13

Chapter 4: Operation

4. Operation

The LEDs on the Extender Units show the real-time status indicating the linking and communication between the local and the remote unit. The LED indicator on the top of the unit shows the status.

The quality of the output signal depends upon the quality of the video source, cable, and display device used. Low-quality cables degrade output signals causing elevated noise levels. Use the proper cable and make sure the display device is capable of handling the resolution and refresh rate selected.

NOTES:

1.The system will disable the video output signal when it detects non-HDCP- compliant display(s) when playing the HDCP video source.

2.A 2D monitor might disable the video output signal when it detects 3D video source.

Video source

with HDCP

from local unit

HDCP

compliant

Remote unit

HDCP

compliant

Figure 4-1. Use a quality video source, cable, and display device.

724-746-5500 blackbox.com

Page 13

Image 13
Contents 3D Hdmi Fiber Extender Trademarks Used in this Manual Trademarks Used in this ManualFCC and IC RFI Statements Normas Oficiales Mexicanas NOMElectrical Safety StatementNOM Statement NOM Statement Table of Contents Specifications SpecificationsOverview FeaturesOverview Introduction What’s IncludedHardware Description System RequirementsLocal and remote units components SC-SC fiber Installation Preparing for Installation InstallationInstallation Steps Operation OperationEdid Configuration Local Unit Only Edid Configuration Local Unit OnlyEdid Configuration Local Unit Only Audio Appendix. Installing Duplex Multimode Fiber Optic Cable Appendix Installing Duplex Multimode Fiber CableBlackbox.com Blackbox.com About Black Box Chapter