Bose Lifestyle (R) VS-2 manual Maintaining Your VS-2, Cleaning, Troubleshooting

English

Maintaining Your VS-2

Cleaning

•Use only a soft, dry cloth to clean the outside of the VS-2.

•Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.

•Do not allow liquids to spill into any openings.

•Do not use any sprays near the VS-2.

Troubleshooting

Problem	What to do
System will not turn on	• Make sure the VS-2 cable is correctly connected between the VS-2 and the media center (see “Connecting the VS-2 to your media
	center” on page 6).
	• Make sure the media center power supply is plugged into an AC receptacle.
No picture on TV	• If you have not done so, load the software update disc into the DVD player. See “Updating the system software” on page 17.
	• Make sure the VS-2 cable is correctly connected between the VS-2 and the media center (see “Connecting the VS-2 to your media
	center” on page 6).
	• Make sure you connected your TV to the TV output connector on the VS-2.
	• Make sure you have selected the correct video input on your TV.
The wrong picture appears	• If you have not done so, load the software update disc into the DVD player. See “Updating the system software” on page 17.
on my TV for the source I	• Make sure your sources are connected to the appropriate VS-2 inputs.
selected
	• Make sure the Serial Data plug from the VS-2 is fully inserted into the media center connector.
	• Make sure you have selected the correct video input on your TV.
Some sources do not	• Make sure your sources are connected to the appropriate VS-2 inputs.
appear on my TV	• Make sure you have not used a source that outputs a video format that is higher in quality than what your TV can accept.

21