Bose Lifestyle (R) VS-2 manual Choosing connection types for your A/V devices, Quality Connector

English

Choosing connection types for your A/V devices		VS-2
1.	Look at the rear panel of each A/V device to determine what type of video output connectors it has.
2.	In the following table, choose the type of available video connector that provides the highest possible video
	quality. We recommend using an HDMI connection if it is available. Place a check mark in the table for the
	connector type used for each of your A/V devices.

If any of your A/V devices do not have an HDMI connector, you can use any other type of connection. Remember, the VS-2 converts these up to HDMI format.

Video	Video		AUX
Quality	Connector	VCR	CBL-SAT (Other)
Best	HDMI		Not
			available
			on VS-2
Better	Component

Good

S-Video

Standard

Composite

Connecting your A/V devices to the VS-2

1.Plug one end of the video cable into the appropriate video output connector(s) on your A/V device.

2. Plug the other end of the video cable into the appropriate Video INPUT connector(s) on the VS-2.

3. Refer to your LIFESTYLE® system installation guide for information on making audio connections. DO NOT USE

9