Main room system and link room system

•If your main Bang & Olufsen system is in standby when you switch it on via your TV, you will only get sound and pictures on your TV – neither the speakers, nor the TV screen in your main system will be cut in.

•If you try to switch on a source in your main Bang & Olufsen system, and you get the pictures and/or the sound from a different source on your TV, it may be because a recording (audio or video) is progressing in your main system.

•When you watch a video source from your main system, for example a satellite programme, you will get pictures and mono sound on your MX 4002 TV.

To obtain pictures and stereo sound (if any is available), you must use the AV* LIST button: press, for example, SAT, LIST until AV* appears, then SAT. (To obtain the stereo sound alone, just press LIST until AV* appears, then SAT, you must do it from standby, though).

•To start playback on a Bang & Olufsen record player in your main system, press LIST until PHONO* is displayed, then GO. Pressing ▲ or ▼ while you are listening to a record makes the record player step through the music in 8 mm steps.

•To start playback on a secondary Bang & Olufsen audio- or video tape recorder in your main system, press LIST until either A.TAPE2* or V.TAPE2* are displayed, then GO.

Main room system

Link room system

• To be able to start a DVD or CDV player connected to your main video system, press DVD on Beo4, then GO. Now operate your DVD or CDV player as usual.

*Note: In order to display PHONO, A.TAPE2, V.TAPE2 and AV on Beo4, you must add the functions to the Beo4 list of functions, please refer to Beo4’s own User’s guide and the chapter, Customising your Beo4, for further information.