Advanced Operation (cont’d)
II.Get to Know the Main Menu (cont’d) Pairing - Pairing a Camera
1.Use ◄ / ► to select a channel.
2.Press OK to start system countdown from 60 seconds.
3.Within the 60 second countdown, press PAIR at the camera side. The camera signal will display when pairing is complete.
Power Saving - Power Saving
Use ◄ / ► to turn Power Saving mode ON/OFF. If VOX is turned on, the receiver and camera will come
out of Power Save mode when sound
is detected according to the set sensitivity level. This means at night,
the monitor LCD will be off, but will
automatically turn on when a noise is detected.
## By setting Power Saving mode ON, both receiver and camera will enter standby mode after
SD Card Format - SD Card Format
Use ◄ / ► to select No or Yes.
## For first time use, it is strongly recommended to format the SD card.
12