Uniden UBW2101 manual Camera Connection, LCD Monitor Connection

Getting Started

Step 1. Connection & Installation

Camera Connection

2

1

1.Connect the power cable to the camera’s DC IN jack, and then plug the power adapter to a standard 120V AC wall outlet.

2.Slide the power switch down once to turn ON the camera.

DC IN 5V/1A

## The built-in Lithium-Polymer battery charges automatically when the power adapter is connected. Charge the battery to full capacity before using the monitor in portable mode. The battery is at full capacity when the green battery indicator turns off.

## Only use the 5V/1A power adapter provided in the package.

LCD Monitor Connection

1.

2

2.

Connect the power cable to the monitor’s DC IN jack and then plug the power adapter to a standard 120V AC wall outlet.

Press the power button to turn

ON the monitor.

1

## The built-in Lithium-Polymer battery charges automatically when the power adapter is connected. Charge the battery to full capacity before using the monitor in portable mode.

## In portable mode, charge the battery when the battery indicator lights up red.

## Only use the 5V/1A power adapter provided in the package.

6