Xantrex Technology 600HD manual Operating an AC Appliance, To operate an AC appliance

Page 27

Operating AC Appliances

Operating an AC Appliance

Before operating your AC appliance, ensure that the battery of the XPower Powerpack is fully charged. See “Recharging with the AC Charger” on page 13 for details.

To operate an AC appliance:

1.Turn the AC outlet ON/OFF switch to the ON position.

The switch illuminates to indicate AC power is available at the AC outlets.

2.Plug the AC appliance into one of the AC outlets and turn the appliance on. XPower Powerpack will operate most devices rated up to 480 W.

3.Recharge the XPower Powerpack as soon as possible after each use.

When using the XPower Powerpack to operate an AC appliance and the low battery warning sounds, the warning gives you time to shut your AC appliance off before loss of AC power.

If you ignore the warning, the XPower Powerpack automatically turns off a few minutes later to prevent battery damage.

In the event of an overload, low battery voltage or overheating, the XPower Powerpack automatically shuts down.

975-0213-01-01

17

Image 27

Contents Owner’s Guide XPower Powerpack 600HDDate and Revision Conventions Used PurposeRelated Information Important Safety Instructions Safety Precautions When Working With Batteries Precautions for Using Rechargeable Appliances Contents Maintenance TroubleshootingSpecifications Automatic Overload About the XPower Powerpack 600HDIntroduction Comprehensive ProtectionJump-Start Cables’ Safety Feature Low Battery ProtectionMaterials List FeaturesFront Panel Detail XPower Powerpack 600HD FeaturesFront Panel Features Feature DescriptionControl Panel Operation Required How to Condition Required ActionCharging Status Radio and Clock Features AM/FM Radio with Digital Alarm ClockRadio and Clock Operation Left Side View DC Power Socket canDetachable heavy-duty jump-start cables AccessoriesOperating Conditions and Guidelines OperationChoosing a Location Dry Cool Ventilated Safe Protected from battery gasesUsing XPower Powerpack 600HD for the First Time Recharging with the AC ChargerTo recharge with the AC Charger Using the Light Operating AC AppliancesUnderstanding AC Appliances Run Time on Typical AC Appliances AC-powered Products Watts a Run time hours bTrouble Appliances To operate an AC appliance Operating an AC ApplianceDC Appliance Watts a Run Time Hours b Operating 12 V DC AppliancesTo operate a 12 V DC appliance To jump-start a vehicle or boat engine Jump-Starting a Vehicle’s EngineJump-Starting a Vehicle’s Engine Listening to the AM Band Using the RadioConnecting to an External Battery Power DrawConnecting to an External Battery Connecting to an External Battery Battery Maintenance MaintenanceFunction button Recharging the XPower Powerpack 600HD BatteryRecharging with the AC Charger Recharging with the DC Charging Cable Recharging with a Generator’s Regulated 12 V DC Outlet Recharging From a Solar Panel To wire the coaxial DC connectorTo replace the external fuse Replacing the Incandescent LightReplacing the External Fuse To replace the light bulbRecycling Television Interference TroubleshootingCommon Problems Buzz in Audio EquipmentProblem Possible Cause Solution Troubleshooting ReferenceGreen Charging Status light is Charging Green Voltage at the AC Use AC wall outlet that supplies Page Specifications Electrical SpecificationsDC Section Internal Battery Charging Controller System AC Power SectionPhysical Specifications AccessoriesRadio Page Warranty Warranty and Return InformationWarranty and Return Exclusions Return Material Authorization PolicyDisclaimer ProductReturn Procedure Out of Warranty Service Information About Your System

Related manuals

Manual 64 pages 37.13 Kb