Xantrex Technology 600HD manual Green Voltage at the AC Use AC wall outlet that supplies

Page 47

				Troubleshooting Reference

Table 5-1Troubleshooting reference
Problem		Possible Cause		Solution
Problem		Possible Cause		Solution

Green		The voltage at the AC		Use AC wall outlet that supplies
Charging		wall outlet is less than		120 V AC.
Status light is		120 V AC.
still flashing
and hasn’t
changed to
steady after 50
hours of
charging.

The engine		XPower Powerpack		Recharge the XPower Powerpack
being jump-		battery is not fully		battery.
started will not		charged.
start.		The engine condition		Have the engine serviced.
		The engine condition		Have the engine serviced.
		is poor.
		External fuse (250 A)		Replace 250 A, 32 V fuse with same
		is blown.		type and ratings.
		The engine start		Upgrade to a higher power XPower
		capacity exceeds the		Powerpack.
		XPower Powerpack
		jump-start capability.

The battery		External fuse (250 A)		Replace 250 A, 32 V fuse with same
clamps of the		is blown.		type and ratings.
jump-start
cables measure
zero volts.

The light does		Light bulb has burnt		Remove lens cover and replace bulb
not turn on.		out.		with one of the same type and rating.

The AM radio		The XPower		Turn off the AC outlets.
does not work		Powerpack AC outlets
or buzzes		are being used,
continuously		causing interference.

975-0213-01-01

37

Image 47

Contents Owner’s Guide XPower Powerpack 600HDDate and Revision Conventions Used PurposeRelated Information Important Safety Instructions Safety Precautions When Working With Batteries Precautions for Using Rechargeable Appliances Contents Specifications MaintenanceTroubleshooting Automatic Overload About the XPower Powerpack 600HDIntroduction Comprehensive ProtectionJump-Start Cables’ Safety Feature Low Battery ProtectionMaterials List FeaturesFront Panel Detail XPower Powerpack 600HD FeaturesFront Panel Features Feature DescriptionControl Panel Operation Required How to Condition Required ActionCharging Status Radio and Clock Features AM/FM Radio with Digital Alarm ClockRadio and Clock Operation Left Side View DC Power Socket canDetachable heavy-duty jump-start cables AccessoriesOperating Conditions and Guidelines OperationChoosing a Location Dry Cool Ventilated Safe Protected from battery gasesTo recharge with the AC Charger Using XPower Powerpack 600HD for the First TimeRecharging with the AC Charger Understanding AC Appliances Using the LightOperating AC Appliances Run Time on Typical AC Appliances AC-powered Products Watts a Run time hours bTrouble Appliances To operate an AC appliance Operating an AC ApplianceDC Appliance Watts a Run Time Hours b Operating 12 V DC AppliancesTo operate a 12 V DC appliance To jump-start a vehicle or boat engine Jump-Starting a Vehicle’s EngineJump-Starting a Vehicle’s Engine Listening to the AM Band Using the RadioConnecting to an External Battery Power DrawConnecting to an External Battery Connecting to an External Battery Battery Maintenance MaintenanceFunction button Recharging the XPower Powerpack 600HD BatteryRecharging with the AC Charger Recharging with the DC Charging Cable Recharging with a Generator’s Regulated 12 V DC Outlet Recharging From a Solar Panel To wire the coaxial DC connectorTo replace the external fuse Replacing the Incandescent LightReplacing the External Fuse To replace the light bulbRecycling Television Interference TroubleshootingCommon Problems Buzz in Audio EquipmentProblem Possible Cause Solution Troubleshooting ReferenceGreen Charging Status light is Charging Green Voltage at the AC Use AC wall outlet that supplies Page DC Section SpecificationsElectrical Specifications Internal Battery Charging Controller System AC Power SectionRadio Physical SpecificationsAccessories Page Warranty Warranty and Return InformationWarranty and Return Exclusions Return Material Authorization PolicyDisclaimer ProductReturn Procedure Out of Warranty Service Information About Your System

Related manuals

Manual 64 pages 37.13 Kb