Bryston Interconnect Cables

BRYSTON

ANALOG/DIGITAL/VIDEO CABLE

We at Bryston, do not think cables should be ‘voiced’ to sound a specific way. The best cable is NO cable at all so we contend that the best cable is the cable that changes the signal the least.

The geometry (where the plus is relative to the minus) of a cable determines the inter-relationship between the measured performance of a specific cable. These measured performance criteria are call the ‘Primary Constants’.They are R-resistance, L- inductance, C- shunt capacitance and G-shunt conductance. You can play around with all types of exotic packaging and add-on appendages you like but ultimately the measured performance (primary constants) tell the tale.

COAX INTERCONNECT CABLES

An analogue Preamp/Amplifier connection is a ‘high impedance interface’ therefore; you are looking for low measured Capacitance. An interconnect cable acts like a capacitor in the signal path so the better that capacitor the better the interconnect. We use an interconnect wire with (very low capacitance) and the RCA connectors are made for us in Switzerland. The RCA cables ‘make and break ground’ first and last when connecting and disconnecting. This prevents ugly pops and bangs from going through your system with the possible negative results.

XLR INTERCONNECT CABLES

The XLR cables we use are also very low in capacitance. Actually the XLR cable we are currently using is in fact low noise balanced microphone cable with 100% shield coverage against RF.The advantage of Balanced XLR cables is that they have a noise canceling effect know as ‘common mode noise reduction’. This helps prevent noise and hum from affecting your system. With today’s complexity of audio and video surround systems this is a big plus, so if you ‘got em-use em’.

DIGITAL CABLES

With ‘Digital’ interconnects things are a lot different. The wavelengths of digital signals are ‘very short’ (same for FM) so the lengths and terminations are much more critical than with the analogue signals previously discussed.When the wavelength of the signal the cable is used for approaches 1/30th of the length of the cable then transmission line effects start to appear and much more attention has to be paid to the connection and termination. If not then reflections and cancellation of data is a real possibility. For instance the AES/EBU digital connection on the back of the Bryston SP2 should be used with a cable having an impedance of 110 ohms.

VIDEO CABLES

Video cables also operate at very high frequencies - typically 5-6 MHz for Composite and S-Video and 8-30 MHz for Component Video depending on the scan rate and resolution. So again understanding the wavelengths of the signals and interfaces involved is important.

BRYSTON

BALANCED XLR CABLE

10B, 10B LR specifications

The Bryston 10B and 10B LR are sophisticated electronic crossovers that have established themselves as benchmarks in high-performance audio systems. These units are designed to optimize the sound reproduction of speaker systems by splitting audio signals into different frequency bands, allowing each band to be routed to the appropriate amplifier and speaker driver for enhanced performance.

One of the standout features of the Bryston 10B is its modular design that offers flexibility to adapt to various sound system configurations. Users can configure the crossover according to their specific audio needs, whether for home theater systems, live sound, or high-fidelity stereo setups. The 10B provides a range of crossover frequency settings, allowing for precise tuning tailored to the characteristics of the speakers in use.

The 10B model is known for its pure analog signal path, which contributes to its transparent sound quality. Bryston has built the 10B using high-quality components, including precision capacitors and resistors, ensuring minimal signal degradation. The crossover employs state-of-the-art filtering techniques, providing steep roll-offs that effectively separate different frequency bands, thus reducing distortion and enhancing clarity.

With the 10B LR model, users benefit from Linkwitz-Riley filters that ensure a smooth transition between frequency bands, which is especially crucial for accurate stereo imaging. The unique design of the 10B LR not only improves phase coherence but also reduces the likelihood of interference between drivers, resulting in a more cohesive and engaging listening experience.

Another significant characteristic of the Bryston 10B and 10B LR is their robust build quality. Constructed in a rugged chassis, these units are designed to withstand the rigors of both professional and home environments. Additionally, Bryston's commitment to performance is mirrored in the lifetime warranty offered on these products, reflecting their confidence in the durability and reliability of their crossover technology.

In summary, the Bryston 10B and 10B LR stand out in the realm of audio engineering for their versatility, advanced filtering technology, and commitment to sound quality. Whether for audiophiles seeking perfection in their home audio systems or professionals requiring reliability in live sound applications, these crossovers deliver exceptional performance that elevates the listening experience to new heights.