Playing Vibrating Pinball | CarAlarms.com 159 specs

Getting started	Playing Vibrating Pinball
		on the score LCD. After you have
To begin playing, flip up the		made your selection, press	START
automatic scoreboard so that you		to begin your game.
can see the score LCD at the top		Putting the ball in play
of the unit. Then press ON to turn
on the game. Next press LEFT		You can launch a ball either by
FLIPPER to select either Game 1		pulling and then releasing the
or Game 2. The game selection		PLUNGER, or by pressing and
will be displayed on the upper		holding RIGHT FLIPPER.	Once
right of the pinball LCD.		the ball is released, use your flip-
Choosing levels		pers to keep the ball in play.
		Playing the game
Press RIGHT FLIPPER to choose
one of six levels, ranging in diffi-		You’ll be challenged by three
culty from Level 1, the easiest, to		balls per game. To score points,
Level 6, the most difficult. The		you need to knock the bricks and

Computers can sometimes “lock up” due to static discharge or other electrical disturbances. If this. should happen, reset the game by pressing RESET


	You get extra points for knocking	sounds off. Press again if you’d
	the pinball inside the spinning	like to turn the sound back on.
	wheel.	Your Excalibur Pinball will pro-
	Pausing during a game	Your Excalibur Pinball will pro-
	Pausing during a game	vide you hours of fun. Please
	If you’d like to pause during the	review the safety, care and bat-
	game, simply press PAUSE. Press	tery instructions on the following
	again to resume your game.	page. And please remember to
	Sound on/off	close the flip-up scoreboard dis-
	Press the SOUND button if you’d	play when not in use to avoid
	like to switch the pinball arcade	damaging it.

level selected will be displayed

hit the bubbles with each pinball.

If no button is pushed for a few minutes, your

Vibrating Pinball game will

switch off to save your batteries.

SPECIAL CARE

• Avoid rough handling such as bumping or dropping.

• Avoid moisture and extreme temperatures. For best results, use between the

temperatures of 39ºF and 100ºF (4º C and 38º C).

• Clean using only a slightly damp cloth. Do not use clean- ers with chemical agents.