Sylvania F075616, F075615, F076008, F075869, F076029, F075835 General Information, Basic Operation

Page 4

OPERATING INSTRUCTIONS

06/01/2008

General Information

Environmental Conditions

 

Ambient Temperature

0°C to 38°C (32°F to 100°F)

Humidity

0% to 90% R.H.

Ambient Pressure

0.8 to 1.2 Bar (11.8 psia to 17.6 psia)

Ventilation

Use in a well-ventilated area away from excess dust, dirt, and moisture.

Cleaning

With unit OFF and unplugged, exterior surfaces may be wiped clean using a damp cloth.

Attaching 230V (European style) plugs (see diagram):

NOTE: Use plug appropriate for local area and codes. Only qualified personnel should perform wiring. Overcurrent protection should be provided external

to the heater unit within plug type shown or similar fusing.

Protective Earthing

The yellow and green ground wire in the power cable is attached directly to the aluminum base plate inside the heater via a dedicated screw terminal. Additional protective earthing can be attached to the aluminum base plate if desired.

Basic Operation

1.Turn SKORPION air heater ON using two switches:

1.1.Switch S1 (blower) sends power to the blower and to heater switch S2.

1.2.Switch S2 (heater) sends power to the heater control circuit.

1.3.Note, for heater safety, S2 (heater) cannot turn ON without S1 (blower) ON.

2.Adjust airflow via a rotational air damper at the blower inlet.

3.Adjust temperature set point with the UP/DOWN arrows on the temperature controller. Heater will ramp to temperature.

3.1.The process temperature is measured with an internal type “K” thermocouple located at the end of an element inside the stainless housing.

4.When turning the heater off the heater power (S2) may be turned off and the blower (S1) left on to cool the heater housing assembly. This is suggested to prevent burn injury of personnel around the heater but is not necessary for safety of the heater element.

OSRAM SYLVANIA

131 Portsmouth Avenue

Exeter, NH 03833 USA

+800-258-8290

+603-772-4331

,: 603-772-1072

www.sylvaniaheaters.com

3

Image 4
Contents Skorpion Process Air Heater Limited Warranty DescriptionHeater Models and Parts List Complete Unit without BlowerGeneral Information Basic OperationDetailed Operation Performance For Skorpion models without Blower external air sourceII. Replacing the Temperature Controller Replacement ProceduresReplacing the Heating Element III. Replacing the Power Controller IV. Replacing the BlowerSkorpion 1.5kW/3.0kW Skorpion 4.5kW Skorpion Without Blower 1.5kW/3.0kW/4.5kW Operating Instructions
Related manuals
Manual 10 pages 45.08 Kb

F076008, F075835, F076029, F075616, F075869 specifications

The Sylvania F075615 is a highly efficient and versatile commercial lighting solution designed to enhance visibility while reducing energy costs. This lighting fixture is particularly noted for its application in retail and office environments, where both illumination quality and energy savings are paramount.

One of the standout features of the Sylvania F075615 is its LED technology. LEDs are known for their longevity and low power consumption, making them ideal for businesses looking to minimize their operating expenses. The F075615 boasts a lifespan of up to 50,000 hours, which significantly reduces the need for frequent replacements. This long lifespan is complemented by a low energy usage, translating to lower electricity bills, a critical advantage for businesses aiming to operate sustainably.

In terms of light output, the Sylvania F075615 provides a bright, uniform illumination that enhances the visibility of products and spaces. With a color temperature of approximately 4000K to 5000K, it offers a neutral white light that is known to improve concentration and mood, making it well-suited for workspaces and retail settings alike. The fixture also ensures high color rendering, showcasing colors accurately, which is particularly beneficial in environments where accurate color perception is important.

Another notable characteristic of the F075615 is its versatility in installation. It is designed to be easily integrated into various types of ceilings, including drop ceilings and recessed applications. This adaptability ensures that businesses can implement the lighting solutions that best suit their spatial configurations and aesthetic preferences.

Moreover, the Sylvania F075615 incorporates advanced thermal management technologies, which help to sustain optimal performance and extend the lifespan of the fixture. By effectively dissipating heat, the fixture reduces wear and tear on its components, contributing to its durability and reliability.

In conclusion, the Sylvania F075615 is an exemplary lighting fixture that combines efficiency, longevity, and versatility. Its advanced LED technology, impressive light output, and easy installation make it a valuable addition to any commercial setting. By adopting the F075615, businesses can achieve significant energy savings while creating a bright, welcoming environment for employees and customers alike.