Replacement Procedures

OPERATING INSTRUCTIONS

06/01/2008

I. Replacing the Heating Element

1.Turn heater/blower switches OFF, and disconnect from power source.

2.Use a flat screwdriver to remove (pry open) the wiring cover under the stainless nozzle tube.

3.Remove the stainless nozzle by removing the two mounting screws, and the thru-bolt which passes through the plastic support tower and threads into the nozzle flange.

4.Disconnect the KTC+ (Yellow), KTC- (Red), HTR1, HTR2 connections from the wiring terminal as shown. Total of four wires.

5.Remove the old element, pulling the KTC and HTR wires through the plastic support tower.

6.Install new element by reversing steps 2-5.

II. Replacing the Temperature Controller

1.Turn heater/blower switches OFF, and disconnect from power source.

2.Remove the four screws which secure the black plastic top cover plate.

3.Remove the four screws which attach the aluminum base plate to the main heater plastic structure.

4.With the top cover plate and the aluminum plate removed, you now have access to the top and bottom mounting tabs on the temperature controller.

5.While lifting the top and bottom white plastic mounting tabs, gently push the temperature controller halfway out of the faceplate.

6.Using masking tape or other method, mark each wire going to the back of the controller with a number 1-9, corresponding to its terminal location. This is CRITICAL to ensure proper wiring to the new controller.

7.Using a small screwdriver, loosen and remove the wires from the terminals at the rear of the temperature controller.

8.Remove temperature controller completely from the faceplate.

9.Install new temperature controller halfway into faceplate.

10.Reconnect the wires according to the terminal number and ID marking from step #4.

11.Press controller into faceplate while engaging the white mounting tab securely.

12.Replace the black plastic top cover plate and reattach mounting screws.

OSRAM SYLVANIA

131 Portsmouth Avenue

Exeter, NH 03833 USA

+800-258-8290

+603-772-4331

,: 603-772-1072

www.sylvaniaheaters.com

F076008, F075835, F076029, F075616, F075869 specifications

The Sylvania F075615 is a highly efficient and versatile commercial lighting solution designed to enhance visibility while reducing energy costs. This lighting fixture is particularly noted for its application in retail and office environments, where both illumination quality and energy savings are paramount.

One of the standout features of the Sylvania F075615 is its LED technology. LEDs are known for their longevity and low power consumption, making them ideal for businesses looking to minimize their operating expenses. The F075615 boasts a lifespan of up to 50,000 hours, which significantly reduces the need for frequent replacements. This long lifespan is complemented by a low energy usage, translating to lower electricity bills, a critical advantage for businesses aiming to operate sustainably.

In terms of light output, the Sylvania F075615 provides a bright, uniform illumination that enhances the visibility of products and spaces. With a color temperature of approximately 4000K to 5000K, it offers a neutral white light that is known to improve concentration and mood, making it well-suited for workspaces and retail settings alike. The fixture also ensures high color rendering, showcasing colors accurately, which is particularly beneficial in environments where accurate color perception is important.

Another notable characteristic of the F075615 is its versatility in installation. It is designed to be easily integrated into various types of ceilings, including drop ceilings and recessed applications. This adaptability ensures that businesses can implement the lighting solutions that best suit their spatial configurations and aesthetic preferences.

Moreover, the Sylvania F075615 incorporates advanced thermal management technologies, which help to sustain optimal performance and extend the lifespan of the fixture. By effectively dissipating heat, the fixture reduces wear and tear on its components, contributing to its durability and reliability.

In conclusion, the Sylvania F075615 is an exemplary lighting fixture that combines efficiency, longevity, and versatility. Its advanced LED technology, impressive light output, and easy installation make it a valuable addition to any commercial setting. By adopting the F075615, businesses can achieve significant energy savings while creating a bright, welcoming environment for employees and customers alike.