Assembly
CAUTION
This package contains small parts
in its unassembled state. Adult assembly is required.
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact
2
• Fit a #8 x ¾" screw with retainer into the rear base and tighten.
• Repeat steps 1 and 2 to assemble the other frame to the rear base.
Tapered Frame Tube
Seat Support | Frame Tubes |
Rear Base
Frame Latches
1
• With the
Frame Assembly
3
• Lay the frame assembly down with long frame tubes up.
• Position the seat support with the frame latches down.
• Slide the seat support onto the frame tubes.
Hint: Push the seat support all the way to the top of the assembly.
You will hear several "clicks".
4