| Assembly |
|
|
|
|
|
|
|
|
|
|
|
| Securing |
|
|
|
|
|
|
|
|
| Your |
|
|
|
|
| C |
| hil | d |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Handle | Pad Strap |
Elastic | Elastic |
Loop | Loop |
Tab
Belt
TabEnds
19
Back
View
•From behind the seat, be sure the shoulder portion of the waist/shoulder belts are secure in the seat back slots.
•Fit the pad strap through the handle and press it to the fastener on the back of the seat.
•Hook the elastic loops on each side of the pad onto the tabs in the seat back.
Assembly is now complete.
IMPORTANT!
•Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing, damaged or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.
•Place the high chair on a level, stable surface away from electrical flexes. Be sure to keep electrical flexes out of child‘s reach.
WARNING
Prevent serious injury or death from falls or sliding out.
The child should at all times wear a safety harness correctly fitted and adjusted.
Waist/Shoulder | Waist/Shoulder |
Belt | Belt |
Crotch |
Belt |
1
•Place your child in the seat. Position the crotch belt between your child’s legs.
•Fasten both waist/shoulder belts to each side of the crotch belt. Make sure you hear a "click" on both sides.
•Check to be sure the restraint system is securely attached by pulling it away from your child. The restraint system should remain attached.
10