Attaching the Seat To the Frame | Storage |
| Chair |
| Attachment |
| Straps |
1 | Door |
•Turn the seat over and open the door. Carefully fit the chair attachment straps into the compartment.
2
IMPORTANT! Close the door completely. If you do not close the door, the seat will not fit on the high chair base.
3
•Fit the seat onto the high chair frame. Push to "snap" into place. Pull up on the seat to be sure it is secure to the high chair frame.
•Pull the frame release latches forward and push the rear legs toward the front legs.
Care
•The tray, pads, seat, seat attachment straps and restraint belts may be wiped clean using a mild cleaning solution and damp cloth. Do not use bleach. Do not use harsh or abrasive cleansers. Rinse clean with water to remove residue.
To remove the pad:
•Push to remove the shoulder belts, waist belts and crotch belt from the seat and pads.
•Unfasten the straps and loops on the seat back and seat bottom.
•Remove the pads from the seat.
•To replace the pad and restraint straps, refer to the assembly instructions in this manual.
IMPORTANT! Be sure to replace the restraint system. Never use this product without the restraint system when used as a high chair or when attached to an adult chair (until your child can get in and out of the product without help).
15