Fisher-Price T0250 manual Assembly, This package contains small parts

Page 4

Assembly

CAUTION

This package contains small parts

in its unassembled state. Adult assembly is required.

IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price®for replacement parts and instructions if needed. Never substitute parts.

Tapered Frame Tube

Rear Base

1

With the Fisher-Price®logo facing out, fit the tapered frame tube into the rear base.

2

Fit a #8 x ¾" screw with retainer into the rear base and tighten.

Repeat steps 1 and 2 to assemble the other frame to the rear base.

Seat Support

Frame Tubes

Frame Latches

Frame Assembly

3

Lay the frame assembly down with long frame tubes up.

Position the seat support with the frame latches down.

Slide the seat support onto the frame tubes.

Hint: Push the seat support all the way to the top of the assembly. You will hear several "clicks".

4

Image 4
Contents T0250 Consumer Information High Chair UseParts Frames Seat Pad Seat Back PadAssembly This package contains small partsSeat Support Footrest Front Base Seat Support Tube Tab Slot Larger Baby Securing Your Child Securing Your Child 3TIGHTENUsing the Tray Adjusting the Seat Attaching To An Adult ChairSlide the door open and pull out the chair attachment straps Remove the Seat Back Attaching the Seat To the Frame CareCanada