Assembly

IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken.

Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts.

Footrest

Seat Bottom

•Place the seat bottom face down on a flat surface.

•At an angle, fit the footrest on the seat bottom, as shown.

Seat Bottom Tubes	Plastic
	Rings

Plastic

Rings

	Seat
	Bottom	Plastic
	Tubes	Plastic
	Tubes	Rings
		Rings

Plastic

Rings

	• Align the holes in the plastic
	rings and the seat bottom tubes.	#8 x 3/4" Screw - 4
	• Insert a #8 x 3/4" screw through	#8 x 3/4" Screw - 4
	• Insert a #8 x 3/4" screw through	SHOWN ACTUAL SIZE
	each plastic ring and into the	SHOWN ACTUAL SIZE
	each plastic ring and into the
	seat bottom tubes, as shown.

•Tighten the screws with a Phillips screwdriver. Do not over-tighten.

•Push the seat bottom tubes back and forth to be sure they are secured to the seat bottom. If the seat bottom tubes move, you have probably not fastened them properly. Remove the screws and check to be sure the screw holes in the seat bottom tubes and seat bottom plastic rings are aligned. Replace and tighten the screws.

Footrest

Insert Screws

Here

• Slide a seat bottom tube through each set of plastic rings on the seat bottom.

	• Insert two #10 x 7/8" black	#10 x 7/8" Black Screw - 2
	• Insert two #10 x 7/8" black	SHOWN ACTUAL SIZE
	screws through the footrest	SHOWN ACTUAL SIZE
	screws through the footrest
	and into the seat bottom.
	• Tighten the screws with a Phillips screwdriver.
	4 Do not over-tighten.