Fisher-Price B0325 instruction sheet Using the Trays, To change shoulder belt slots

Page 12

Securing Your Child

4

To change shoulder belt slots:

From the back of the high chair, push the shoulder portion of the waist/shoulder belts through the seat back slots.

Shoulder

Portion

5

Using the Trays

WARNING

Prevent serious injury or death from falls or sliding out.

The child should be secured in the high chair at all times by the restraining system, either in the recline, semi-recline or upright position. The restraint belts must be adjusted to fit your child snugly. The tray is not designed to hold the child in the chair.

Base Tray

Armrest

Armrest

6

From the front of the high chair, pull the shoulder portion of the waist/shoulder belts out and then fit them back through the desired shoulder belt slots in the headrest pad, seat pad and the seat back. Pull on the belts to be sure they are secure in the seat back.

Fit the base tray onto the seat armrests. Push down until the base tray "snaps" into place.

Hint: Before use, thorougly wash all parts (the trays) that may contact food.

12

Image 12
Contents High Chair Consumer Information Prevent serious injury or death from falls or sliding outParts #8 x 3/ 4 ScrewAssembly Front Base Back BasePress Lever HintsBack Bottom ViewBot t o m Vie w Back Bottom ViewSlot Crotch Belt Back View Securing Your Child TightenTo tighten the waist belts To loosen the waist beltsUsing the Trays To change shoulder belt slotsBase Tray Squeeze Latch Release Bar Using the Brakes LockAdjusting the Seat To adjust the seat angleTo replace the pad and headrest refer to Assembly steps Storage CareTo remove the pad and headrest B0325pr-0920