Assembly
CAUTION
This product contains
small parts in its
unassembled state. Adult assembly is required.
Pedal
Assembly
Frame
1
•Fit the pedal assembly into the groove in the underside of the frame, as shown.
Hint: The pedal assembly is designed to only fit one way. If it does not seem to fit, turn it around and try again.
•Insert four screws into the pedal assembly. Fully tighten the screws.
Front Base
(Small)
2
•Fit the front base (small) onto the bottom of the frame, as shown.
Hint: The front base is designed to fit onto the frame one way. If it does not seem to fit, turn it around and try again.
•Insert four screws into the front base and tighten.
Seat Post
Rear Base
(Large)
3
•Fit the rear base (large) onto the end of the seat post, as shown.
Hint: The rear base is designed to fit onto the seat post one way. If it does not seem to fit, turn it around and try again.
•Insert two screws into the rear base and tighten.
4