assembly instructions

ASSEMBLY

Step 9:

Cap Pec Dec Top Pulley Block (23) with 2" End Plugs (54). Cap Pec Dec Support (24) with 2" End Plugs (54). Insert four 3/4" Bushings (70) into the sleeves on the Pec Dec Support (24).

Attach Pec Dec Top Pulley Block (23) and Pec Dec Support (24) to the Pec Dec Upright (6) using two 1/2" x 3-1/8" Hex Head Bolts (76), four 1/2" x 1- 1/16" Washers (89) and two 1/2" Nylon Nuts (94).

Cap Right Pec Dec Arm (15) with two 2" Sq End Plugs (54). Slide 3/4" x 1- 1/2" Washer (87) and Pec Dec Adj Cam (25) onto the Right Pec Dec Arm (15).

NOTE: The ringlet on the Pec Dec Adj Cam (25) MUST face outside.

Lock the Pec Dec Adj Cam (25) with Pop Pin (67). Slide the Right Pec Dec Arm (15) onto the Pec Dec Support

(24)and secure with 1/2" x 1-1/4" Washer (95) and 1/2" Nylon Nut (94). Cap 1/2" Nylon Nut (94) with Cap for Nut (56). Slide the 4" Pec Dec Foam Pad (42) onto the Right Pec Dec Arm (15).

Repeat the same procedure for the Left Pec Dec Arm (16), Pec Dec Adj Cam (25) and Pec Dec Sopport (24).

-16-

Page 16
Image 16
Evo Fitness 51551 owner manual Assembly instructions