Evo Fitness 51551 owner manual Two 1/2 Nylon Nuts

assembly instructions

ASSEMBLY

Step 5:

Attach the Lat Bar Holder (19) to the Top Cross Frame (7) using two 3/8" x 3" Hex Head Bolts (78), four 3/8" x 7/8" Washers (90) and two 3/8" Nylon Nuts (96).

Cap Top Cross Frame (7) with 2" x 3" Rect End Plugs (55). Insert two 1" Bushing (69) into the holes under the Top Cross Frame (7).

Slide Top Cross Frame (7) over the two Guide Rods (9). Align the mounting holes in the Top Cross Frame

(7)with the holes in the Pec Dec Upright (6) then secure with two 1/2" x 3-1/8" Hex Head Bolts (76), four 1/2" x 1-1/16" Washers (89) and two 1/2" Nylon Nuts (94). Attach Top Cross Frame (7) to the Top Connect Beam

(4)using two 1/2" x 4-1/4" Hex Head Bolts (73), four 1/2" x 1-1/16" Washers

(89)and two 1/2" Nylon Nuts (94).

-12-