ASSEMBLY
Step 4:
Insert the 1" Bushings (69) to the holes in Weight Base (21).
Insert the Guide Rods (9) through the 2" Rubber Doughtnuts (63), Weight Stands
(31)and into the holes in the Weight Base (21).
Insert two 1" Bushings (59) into the Weight Top Block (22). Attach the Select Rod (32) to the Weight Top Block (22) using Top Weight Plate Bolt (72). Insert the Weight Top Block (22) over the Guide Rods (9).
Slide 3" Rubber Doughnuts (61) and Short Olympic Sleeves (35) onto both ends of the Weight Top Block (22) and secure with 5/16" x 1/2" Set Screws (86). Attach 2" Spring Clips (57) to Short Olympic Sleeves (35).
