scheduled time/date.
▶Date/ HH:MM:SS
If Resume By RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specific date/hour/minute/second specified in these fields (using the <+> and
▶Resume By PCI or 
When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PCI or PCIE device.
▶Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3 (Sus- pend to RAM) sleep state.
▶Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard
These items determine whether the system will be awakened from what power sav- ing modes when input signal of the PS/2 mouse/ keyboard is detected.
Mflash
▶BIOS Boot Function
This allows you to enable/ disable the system to boot from the BIOS file inside USB drive (FAT/ 32 format only).
▶Select UEFI file to boot from
When the BIOS Boot function as sets to [Enabled], this item is selectable. This item allows to select particular UEFI file from the USB/ Storage (FAT/ 32 format only) drive. And the system will boot from selected UEFI file.
▶Save current UEFI rom to file
Please setup a specific folder in specific USB/ Storage drive to save UEFI file from ROM chip data. Note: it only supports FAT/ 32 file system drive.
▶Select UEFI file to flash
This item allows you to select particular UEFI file from the USB/ Storage (FAT/ 32 for- mat only) drive for updating BIOS.
