▶USB Configuration
Press <Enter> to enter the
▶USB Devices:
This item shows the type of installed USB device.
▶Intel
Onchip USB Controller
This item allows you to enable/ disable the USB controller. ▶Legacy USB Support
This item allows you to enable/ disable the legacy USB support for USB keyboards, mice and floppy drives. You will be able to use these USB devices with operating systems that do not support USB.
▶Onboard NEC USB 3.0 Controller
This item allows you to enable/ disable the USB 3.0 controller.
▶Super IO Configuration
Press <Enter> to enter the
▶Serial
Port 0 Configuration
Press <Enter> to enter the
▶Serial
Port
This item allows you to enable/ disable the serial port.
▶Change Settings
Select an address and corresponding interrupt for the serial port.
▶H/W Monitor
Press <Enter> to enter the
