FASSEMBLY
18 |
• Insert three #8 x 3/4" screws into each plate and tighten.
Motor Harness
DashConnector
Connector
Front
| Radio | |
19 | Connector | |
BACK VIEW | ||
|
•Separate the radio and dash connector wires from the motor harness connector.
•Position the motor harness connector towards the front of the vehicle and into the battery compartment.
•Position the dash connector and radio connector wires toward the back of the vehicle.
Windshield/Dash
Dash
Connectors
Radio
Connectors
20 |
•Open the doors on the vehicle.
•Place the windshield/dash on top of the front end of the vehicle.
•Plug both dash connectors together.
•Plug both radio connectors together.
Hint: If the connectors do not fit together, do not force them. Simply turn one of them over and try again!
Windshield/
Dash
21 | FRONT VIEW |
•Fit the tabs on the windshield/dash into the slots in the front end of the vehicle.
14 | |
|
|