Assembly
11 | 13 |
| Seat Pin |
•While pushing down on the seat, insert the seat pin through the hole in the seat and into a seat mount adjustment hole.
Handle Top
Base
Handle Bottom
12
•Fit the handle top and bottom to the end of the base, as shown.
•Insert 13 - #8 x ¾" screws into the handle top and tighten.
Grooves | Wheel |
| Retainers |
14
Base/Handle
•Place the base/handle assembly on a flat surface so that the wheel retainers are upright.
•Fit the trike onto the base/handle assembly so that the rear frame rests in the grooves in the base and the front wheel fits between the wheel retainers in the base/handle.
8