Correct

Hubs

Back Base

3	Front Curved Base

•Place the front curved base on a flat surface so that it curves away from you.

•Place the back base on a flat surface, behind the front curved base.

•Position the leg assemblies so that the hubs are facing each other.

•Fit the ends of the legs over the ends of the front and back bases, as shown.

Hint: You may need the help of another adult to help you balance the assembly.

HUBS FACE IN

FRONT BASE CURVES INWARD

•Check to be sure you have assembled the leg assemblies to the bases correctly. Please refer to the illustrations above.

•If the leg assemblies are assembled incorrectly to the bases, pull the legs from the bases. Please re-read and repeat assembly step 3.