Swing Frame Assembly
Hubs
Seat Tubes
Seat Tube Support
Seat Tubes
5
•Insert the ends of the seat tubes into the sockets in the hubs.
•Push the seat tubes in until you hear a “snap” (for each).
7
•Locate the holes on the bottom of the seat tubes.
•Position the seat tube support so that it is a 
shape.
•Fit the seat tube support to the seat tubes. Hold the seat tube support in place and proceed to step 8.
6
• Insert a #4 x 3,18 cm screw into each hub and tighten.
8
•Insert an M5 x 2,9 cm screw through each seat tube and the seat tube support.
IMPORTANT! Please follow the next assembly (step 9) carefully to completely secure the seat tube support to the seat tubes.
8