Assembly
Elastic Loop
Peg | Peg |
Elastic Loop
9
Bottom
View
•While holding the elastic loops in place, turn the seat face down.
•Hook the elastic loop on the left side onto the peg on the right side.
•Hook the elastic loop on the right side onto the peg on the left side.
Hint: The elastic loops should cross over each other when attached correctly to the pegs.
Seat Tube
Arm Hole
Seat Tube
Button
11
•While pressing the button on the seat tube, slide the seat tube arm onto the seat tube. Make sure the button on the seat tube “snaps“ into the hole in the seat tube arm.
Fasteners
10
•Turn the seat upright.
•Fit the pad edges around the rim of the seat.
•Attach the two fasteners on each side of the pad to the fasteners on each side of the seat.
M4 x 31.5 mm Bolt
Rounded
Side
M4 Lock Nut
Shown Actual Size
12
•Insert an M4 x 31.5 mm bolt through the seat tube arm and seat tube.
•Attach an M4 lock nut to the bolt. Make sure the rounded side of the lock nut faces out.
•Using an adjustable wrench, hold the lock nut in place. Then using a Phillips screwdriver, tighten the bolt. Do not
5