Scale Components
FrontBack
Ready/Complete Symbol
WEIGHT A lbkg
WEIGHT B lbkg
Low Battery Mark | Slide Switch |
| Measurement Switch |
|
| Battery Compartment |
|
|
| ||
|
|
| ||
|
|
| ||
|
|
|
|
|
❒The following measurements can be selected by the Slide Switch and are broken into two categories - WEIGHT A and WEIGHT B. Within WEIGHT A and WEIGHT B, you have a choice to select and have your weight dis- played in kg. or lb. The difference between WEIGHT A and WEIGHT B is the speed of communication from the data port to another device (e.g. modem, printer, telephone). Please follow instructions from your telemonitor- ing company to select the proper position on the Slide Switch.
❒The scale has an
Display Symbols
Ready/Complete symbol. This symbol is displayed when the measurement display is stable.
Low battery mark. If this mark is displayed, replace the batteries with new ones.
Installing (or Replacing) Batteries
Caution
❒Insert the battery with the positive (+) and negative
❒Improper installation of the batteries may cause battery leakage.
❒Replace four batteries with new ones, when symbol is displayed.
❒Do not mix used and new batteries. It may result in damage to the scale or shorten battery life.
❒The battery life is dependant upon the environmental temperature, battery type and usage.
❒Remove the batteries from the battery compartment, when the scale is not to be used for a long time. They may leak and damage your scale.
Steps for Installing (or Replacing) Batteries
1.Remove the battery compartment cover on the underside of the scale by gently pushing on the arrow and lifting the cover backward.
2. Place four new “AA” batteries with positive (+) and negative
3. Replace the cover by sliding it into the compartment and gently pressing into place.