Specifications UC-321PL, Maintaining the Scale

Specifications UC-321PL

Digital display	Liquid crystal display, one inch character height
Maximum capacity	450 lb. (200 kg)
Minimum display	0.2 lb. (0.1 kg)
Data Output	RS-232C CMOS (Use special cable, not included)
Power source	Four type AA batteries (R6P, 1.5 volt x 4)
Battery life	Approximately 2000 measurements
Accessories	Add-on feet (4), Batteries (4), Instruction Manual

Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.

Maintaining the Scale

❒Clean the scale with a dry, soft cloth or a cloth moistened with water and a mild detergent. Never use alcohol, benzene, thinner or other harsh chemi- cals to clean the scale.

❒Remove the batteries, if the scale is not going to be used for a long time.

Before Requesting Service

	Symptoms	Corrective Action
Nothing is displayed by pressing		Check the battery installation.
the measurement switch.		Replace batteries.
The indication is fixed to 88888.		Remove and reinstall batteries.
H or L or E-0is displayed.
There is a large difference		Place scale on a firm surface.Is some-
between estimated weight and		thing touching the button case?
data measurement.

	is displayed.	Replace batteries.
	is displayed.	Replace batteries.

Measuring weight on a shag carpet

Please use the enclosed add-on feet if you wish to use the Precision Health Scale on shag carpet.

How to insert the add-on feet.

There are two pins on each add-on foot side. Match those pins to the holes on the scale leg and insert firmly. Make sure to put add-ons to all 4 legs.

Notes

1.Please be careful not to fall when using the add-on feet.

2.We recommend using this scale on a firm and level ground.

-6-

-7-