7.3UNITS SELECTION (FOR AQT 200 ONLY)
•Next press [Unit] to enter the units selection mode, the display will show "On ct".
•Press [Tare] to select On or OFF.
On means this weighing unit is enabled, OFF means this unit is disabled.
•Press [Unit] to go to the next weighing unit. The following weighing units can be selected in sequence.
ct – oz – dwt – tL.H – tL.S – tL.T (Note: g is always activated)
•Turn the balance off and back to on again to return to normal operation.
NOTE: It is recommended that the balance is used in a location with sufficient light so that the backlight function can be turned off to maximise the battery life.