4. Clip-Mount
Clip the UBR243 on ledges and shelves.
1. Press the mounting clip as shown.
2. Place the unit over the mounting surface and release.
3. Adjust the camera as needed.
Connect Power
1.Insert the AC adapter power plug into the camera’s DC adapter input jack.
2.Plug the other end into a 120 volt AC (standard indoor) power outlet or surge protector. The red charging LED turns on.
3.Press POWER. The green power LED turns on and the monitor now displays camera video. If it doesn’t, try reconnecting the AC adapter, making sure the power outlet isn’t controlled by a wall switch.
11