EN•ENGLISH
•IMPORTANT: read the instructions carefully before using the stroller. Save the instructions for future reference.
•PEG PEREGO reserves the right to make any necessary changes or improvements to the products shown at any time without notice.
CUSTOMER SERVICE
If parts of the model are accidentally lost or damaged, use only original Peg Perego spare parts. Contact the Peg Perego Customer Service for all repair work, replacements, information about products, and sale of original spare parts and accessories, at the following:
USA:
tel.: 800.671.1701
fax: 260.471.6332
Call us toll free: 1.800.671.1701
CANADA:
tel.: 905.839.3371
fax: 905.839.9542
Call us toll free: 1.800.661.5050
www.pegperego.com
INSTRUCTIONS FOR USE
ASSEMBLING THE HIGH CHAIR
1• Attach the wheels, making sure to insert the ones with the brakes on the back part of the high chair.
2• Attach the two front wheels, pressing in the direction shown by the arrow.
3• When it comes out of the packaging, the seat of the high chair is not in the correct position for use (it is in packing position). To use the high chair, lift the seat as in the figure until you hear a click, placing it at one of the seven different possible heights. To place the seat in the position for it to be put back in its packaging, see directions below.
TO OPEN THE HIGH CHAIR
4• To open the high chair, push the little red levers on the sides downwards as in the figure, pressing down on the back supports.
5• Lower the footrest, as shown in the figure.
BRAKE
6• The high chair has four swivel wheels, with brakes on two of them. To brake the high chair, lower the little brake levers on the rear wheels. To release the brakes, lift
the levers. For your convenience, always make sure the brakes are set before carrying out any other operation on the high chair.
TRAY
7• To attach the tray, pull the lever under it towards you while slipping the tray onto the armrests. Push all the way in, as shown in the figure.
8• The high chair tray can be adjusted to three different positions. The third position (marked with red notches)is not meant for use with the tray; it is used for folding up the tray.
•To extend the tray, pull the lever under it towards you as you pull the tray out to the first position. Repeat the operation to set the tray in the second position.
•To remove the tray, pull the lever as you pull the tray towards you.
9• The high chair comes with two trays. The child can play on the lower tray and eat on the upper one, which is easy to wash and can be kept perfectly clean.
•To remove the meal tray, unhook it from the lower tray by lifting as shown in the figure.
SAFETY BELT
10• Make sure that the shoulder strap is correctly inserted, by pressing on it, as shown in figure A. Fasten the lap belt as shown in figure B.
11• To unfasten the safety belt, press the sides of the buckle (fig. A) while pulling the lap belt outwards (fig. B).
12• The shoulder straps can be adjusted to two different heights. Unfasten the safety belt from behind the backrest by pushing the buckle downwards (fig. A). Slip the safety belt out of the sack (fig. B).
13• Next, slip the safety belt buckle through the other opening in the backrest (fig. A), and fasten the buckle to the peg, pulling the safety belt until it clicks into place (fig. B).
7 HEIGHTS
The high chair adjusts to 7 different heights.
14• To lift the high chair, hold it under the tray and pull upwards.
15• To lower the high chair, simultaneously press the two side buttons, stopping at the desired height.
These operations can be carried out with the child in the high chair.
RECLINING HIGH CHAIR
16• The high chair reclines, and adjusts to four different positions: for mealtime, playtime, relaxing, or napping. To adjust it, lift the handle behind the backrest and set the high chair to the desired position. This operation can be carried out with the