Set-Up
& Use
&Anchored End | Anchored End | |
| ||
|
| B |
| B |
|
2 | Free End | Free End |
|
| |
| Tighten | Loosen |
To tighten the belts:
•Feed the anchored end of the belt up through the buckle to form a loop 
.
•Pull the free end of the belt B .
•Repeat this procedure to tighten the other belt.
To loosen the belts:
•Feed the free end of the belt up through the buckle to form a loop 
. Enlarge the loop by pulling on the end of the loop toward the buckle.
•Pull the anchored end of the belt to shorten the free end of the belt B .
•Repeat this procedure to loosen the other belt.
Please Note: After adjusting the belts to fit your child, make sure you pull on them to be sure they are securely fastened.
3
Calming Vibrations
•Make sure your child is properly secured in the seat.
•To turn vibrations on, slide the power switch on the soothing unit to the on position 
.
•To turn vibrations off, slide the power switch on the soothing unit to the off position 
.
IMPORTANT! If vibrations from the soothing unit become faint, or if there are no vibrations, remove the battery from the soothing unit and dispose of it properly. Replace the battery with a new LR20 (“D”) alkaline battery.
14