2.During power ON, when adapter is plugged in, the battery icon on screen's top right corner will show that the battery is charging. The Blue LED at the top left corner light up indicates adapter is plugged in.
2.4Registration (Pairing)
The Baby monitor is
To
1.Press the M button of the parent unit and the menu bar will pop up.
2.Press the < LEFT button or > RIGHT button until C is highlighted, and the del/add/view/scan menu will pop up.
3.Press the + UP button or - DOWN button to select ADD, and press the OK button to confirm.
4.CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or - DOWN button to select the desired CAM and press the OK button to start searching for a camera unit. The green audio level LED will flash rapidly while searching.
5.Press the OK button to confirm.
6.Press and hold the PAIR button underneath the baby unit until the parent unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current Baby Unit again will overwrite the old registration.
2.5View Video Through TV
Connect a suitable AV cable into the AV OUT socket on the side of the Parent Unit and into the AV input of the TV. Scroll through the AV inputs on the TV menu until the Baby monitor picture is visible.
AV cable is an optional accessory, which is to be purchased separately.
NOTE
The Monitor's power button must be turned ON and CAM
10 | Getting Started |
|
|