4.5Alarm
1.Press the M button and the menu bar will pop up.
2.Press the < LEFT button or >RIGHT button until A is highlighted.
3.Press the +UP button or - DOWN button to select the alarm time (6h, 4h, 2h). (The default setting is Alarm OFF.)
If an alarm time is selected, the parent unit will beep for about 45 seconds after every 6, 4 or 2 hour period, and the alarm icon will flash red.
4.6Camera Control
4.6.1 Add (pair) a camera
1.Press the M button and the menu bar will pop up.
2.Press the < LEFT button or > RIGHT button until C is highlighted, and the del/add/view/scan menu will pop up.
3.Press the +UP button or - DOWN button to select ADD, and press the OK button to confirm.
4.CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or - DOWN button to select the desired CAM, and press the OK button to start searching for a camera unit. The green audio level LED will flash rapidly while searching.
5.Press and hold the PAIR button underneath the baby unit until the parent unit finds the camera, beeps and the picture from the camera appears.
NOTE
A camera can only be registered to one parent unit at any one time.
4.6.2 View a camera
1.Press the M button and the menu bar will pop up.
2.Press the < LEFT button or > RIGHT button until C is highlighted and the del/add/view/scan menu pops up.
3.Press the +UP button or - DOWN button to select VIEW, and press the OK button to confirm.
4.CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or - DOWN button to select desired CAM, and press the OK button to view the picture from that camera.
ENGLISH
MBP36 Parent Unit Menu Options | 13 |
|
|