Rear
Item | Description |
Microphone jack | Supports audio sensing, audio recording, and two-way audio. |
| Maximum length of microphone cable: 3 m (9.8 ft). |
Speaker jack | Supports two-way audio. |
| Maximum length of speaker cable: 3 m (9.8 ft). |
A-Link port | Used for cascading NetBotz sensor pods and temperature and humidity |
| sensors with digital displays. Provides communications and power to the |
| connected devices over standard CAT-5 cabling with straight-through |
| wiring. For details, see “Connect Sensors and Sensor Pods to A-Link |
| Ports” on page 14. |
10/100 Base-T Provides for a 10/100 Base-T network connection and power through
network port Power-over-Ethernet (PoE). Status and link LEDs indicate network
traffic:
•Status LED—blinks orange and green at start-up; indicates the status of the network connection (solid green—IP address established; blinking green—attempting to obtain an IP address).
•Link LED—blinks to indicate network traffic (green—connected at 10 Mbps; orange—connected at 100 Mbps).
Sensor ports (4) Used for connecting APC sensors, third-party dry-contact sensors, and standard third-party 0-5 V sensors. Third-party dry-contact state sensors require the NetBotz Dry Contact Cable (NBES0304). Standard third-party 0-5 V sensors require the NetBotz 0-5 V Sensor Cable (NBES0305).
NetBotz 455 Installation and Quick Configuration Manual | 5 |