Testing Reception (for Sound)
Test transmitter transmission and receiver reception
each time you change location of use.
Power
Indicator
Power
Switch
Power/Volume
Dial
Power
Indicator
Place transmitter in room in which you intend to use it. Rotate transmitter power switch to turn power on. Power indicator lights. Turn on a radio.
Place receiver in room in which you intend to use it. Rotate the power/volume dial to turn power on. Power indicator lights. Adjust receiver location.
BUZZZZ
Adjust | • Variable light display lights when | |
sound is received by receiver: | ||
Channel | ||
|
STATIC
-One two dots light for shallow sounds.
-Three or more dots light for louder sounds.
If you experience interference (buzzing or static, etc.) while using one channel setting, switch both units to other channel. Selecting a channel is usually a one time adjustment.
Hint: All five dots in receiver variable light display light:
-If you turn receiver power on before transmitter power. You will also hear static noise. Turn volume down on receiver and turn transmitter power on.
-If the receiver is too far away from the transmitter. Move the receiver closer to the transmitter.
-If loud sounds are transmitting.
5