Setup For Vibrations Use
2
3
6
7
5
“Wah, Wah,
Wah…”
1
4
IMPORTANT! Test reception of this monitor before first time use and whenever you change location of transmitter (see page 6).
1Set transmitter channel switch to same channel as receiver.
2Place transmitter in same room with child. Point microphone directly toward crib or play area.
3Unwrap and fully extend power cord for best transmission. Plug transmitter power cord into wall outlet.
4Slide transmitter power switch to turn power on. Power indicator lights.
5Clip receiver to your clothing, where you will feel vibrations. Or, place the receiver in your pocket.
6Rotate receiver power/volume dial to turn power on. Power indicator lights. Rotate power/volume dial to adjust volume (if you want to hear sounds).
7Press the vibrations button. Vibrations ready indicator lights.
Hint: Under permitting conditions, the receiver receives sounds (and you will feel vibrations) up to 1,000 feet away from baby.
9