Problems & Solutions
Problem | Solution |
You hear static or buzzing | Receiver is out of range of transmitter. Move receiver closer |
| to transmitter. |
| Note: Range varies depending on surrounding conditions such |
| as noise levels, physical obstructions and signal interference. |
|
|
| Transmitter power is off. Turn transmitter power on. |
| Channel switches are on different channels. Make sure |
| channel switches on both transmitter and receiver are |
| set to same channel. |
| Loose power cord connection and transmitter power is off. |
| Check transmitter power cord |
| No power to wall outlet and transmitter power is off. Make |
| sure light switch that controls power flow to wall outlet is on. |
| Power is off because circuit breaker for room is off. Make sure |
| house fuses and circuit breakers are on. |
Receiver power indicator does not light | Receiver power is off. Turn receiver power on. |
| Batteries in receiver are weak or dead. Replace all batteries |
| with three, alkaline “AAA” (LR03) batteries or use AC adaptor |
| as power source. |
|
|
| Power is off because circuit breaker for room is off. Make sure |
| house fuses and circuit breakers are on. |
| No power to wall outlet and power is off. Make sure light |
| switch that controls power flow to wall outlet is on. |
Receiver low battery indicator lights | Batteries in receiver are weak or dead. Replace all batteries |
| with three, alkaline “AAA” (LR03) batteries or use AC adaptor |
| as power source. |
Transmitter power indicator does not light | Transmitter power is off. Turn transmitter power on. |
| Loose power cord connection and transmitter power is off. |
| Check transmitter power cord |
| No power to wall outlet and transmitter power is off. Make |
| sure light switch that controls power flow to wall outlet is on. |
| Power is off because circuit breaker for baby’s room is off. |
| Make sure house fuses and circuit breakers are on. |
You can hear conversations or sounds from | There is signal interference due to other nursery monitors on |
other homes | same channel or cordless telephone use. Change channel |
| switches on both transmitter and receiver to eliminate source |
| of interference. |
Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are damaged, please contact Mattel.
PRINTED IN CHINA | |
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. |