Testing Sound Reception
Test transmitter transmission and receiver reception each time you change location of use.
Adjust Channel
Static
Buzzzz
Power Button
•Place transmitter in room in which you intend to use it.
•Press transmitter power button to turn power on. Power indicator lights.
•Set transmitter channel switch to same channel as receiver. Turn on a radio.
Low Battery Indicator | On/Off/Volume Dial |
•Place the receiver in the room in which you intend to use it.
•Turn on/off/volume dial to turn power on. Power indicator lights. Adjust receiver location for best reception.
Hint: If battery power is low, the low battery indicator lights. Replace batteries with three, new alkaline “AAA” (LR03) batteries or use AC adaptor for power source.
•Sound lights turn on when sound is received by the receiver.
-One or two lights for shallow sounds.
-Three or more lights for louder sounds.
•If you experience interference (buzzing or static, etc.) while using one channel setting, switch all units to other channel. Selecting a channel is usually a one time adjustment.
Hint:You will see all five sound lights:
-If you turn receiver power on before transmitter power. You will also hear static noise. Turn volume down and turn transmitter power on.
-If the receiver is too far away from the transmitter. Move the receiver closer to the transmitter.
-If loud sounds are transmitting.
6