Aiphone GW-LE8 manual Mounting, Standard flush mount installation, Filling in resident names

MOUNTING:

1. Cut appropriate sized mounting hole into wall.

GW-2GW-3

4-1/2"4-1/2"

8-1/8"

11-3/4"

2. Assemble and mount entrance panel

1.Open a hole in the back box to pass cable through.

2.Mount the GW-LE8 to the GW-DP using the supplied screws.

3.Mount the components to the GW-2 or GW-3 frame.

4.Mount the frame to the back box.

5.Replace the two mounting screw covers.

Standard flush mount installation:

GW-3

(Frame)

GW-DP +

GW-LE8

(GW-LE8 mounts to GW-DP with supplied screws)

GW-4P

(Call switch panel)

GW-3

(Box)

Flush mount installation with weather hood:

GW-3	GW-003H
(Frame)	(Weather hood)

GW-DP +

GW-LE8

(GW-LE8 mounts to GW-DP with supplied screws)

GW-4P

(Call switch panel)

GW-3

(Box)

Surface mount installation with weather hood:

GW-3	GW-003HB
(Frame)	(Weather hood)

GW-DP +

GW-LE8

(GW-LE8 mounts to GW-DP with supplied screws)

GW-4P

(Call switch panel)

Filling in resident names:

1.Remove protective cover using opener.

(Opener included with GW-2 and GW-3 frames)

Protective Cover

Opener

Pg. 5